Work Visa

Work Visa Program:

Each year, close to 100,000 foreign nationals enter Canada to work. Canadian citizens and Canadian Permanent Residents have the right to work in Canada. As a general rule, most other individuals require a Work Permit, issued by Canadian Immigration Officials, before commencing employment activities in Canada. Work In Canada – Basic Facts
For Canadian Immigration purposes, “work” is defined as an activity for which remuneration is earned or an activity that competes directly with activities of Canadian citizens or Permanent Residents in the Canadian labour market.
Canadian Immigration authorities do not permit a limited number of work related activities in Canada without a Work permit.
A job offer from a Canadian Employer is usually a prerequisite to receiving a Work Permit.
In some instances, Canadian Immigration Regulations allow for “open” Work Permits that are not employer specific.
Work Permits are always temporary in nature, but often can be extended from inside Canada.
Normally, Work Permits will only be granted by Canadian Immigration authorities if supported by a positive “Labour Market Opinion” (LMO) letter issued by Human Resources and Skills Development Canada (HRSDC), indicating that the proposed employment will not adversely affect Canadian workers.

Canadian Plasterers / Drywall Installers

We are currently accepting requests from foreign nationals with suitable experience and training as Plasterers / Drywall Installers, seeking to live and work in Canada on an expedited basis, for immediate full time employment in this occupation in Canada.

Our fast track work programs provide qualified applicants and their families with immediate temporary entry to Canada on the basis of a government-approved offer of full time employment commensurate with their qualifications.

Qualified applicants will receive work permits for immediate entry to Canada along with their family dependents. Thereafter qualified applicants and their families may also apply for Canadian permanent residence.

To qualify, prospective applicants must meet the following basic requirements:

1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable 3-year apprenticeship program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences).

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

Clean and prepare surfaces.
Mix plaster ingredients in trough to desired consistency;
Apply, level and smooth coats of plaster using trowels, floats, brushes and spraying equipment;
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces;
Finish corners and angles and create decorative designs in finish coat, if required;
Cure freshly plastered surfaces;
Mould and install ornamental plaster panels, cornices and trim;
Spray acoustic materials or texture finish over walls and ceilings.

Drywall installers and finishers perform some or all of the following duties:

• Measure, cut and fit drywall sheets for installation on walls and ceilings;
• Position and secure sheets to metal or wooden studs or joists;
• Cut and install metal corner beads to protect exterior corners;
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife;
• Tape over joints using taping machine and embed tape in compound;
• Smooth out excess compound and allow coat to dry;
• Apply successive coats of compound and sand seams and joints;
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Plasterer / Drywall Installer.

How to proceed forward with our assistance

1. Complete the questionnaire and we will further evaluate your qualifications.
2. We will evaluate your qualifications and contact you within 1-2 business days to discuss the modalities of this program.

Canada Carpenters / Cabinetmakers

We are currently accepting requests from foreign nationals with suitable experience and training as Cabinetmakers, seeking to live and work in Canada on an expedited basis for immediate full time employment in this occupation in Canada.
Our fast track work programs provide qualified applicants and their families with immediate temporary entry to Canada on the basis of a government approved offer of full time employment commensurate with their qualifications.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable 4 year apprenticeship program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences).

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

• Study plans, specifications or drawings of articles to be made, or prepare specifications
• Mark outlines or dimensions of parts on wood
• Operate woodworking machines, such as power saws, jointers, mortisers and shapers, and use hand tools to cut, shape and form parts and components
• Trim joints and fit parts and subassemblies together to form complete unit using glue and clamps and reinforce joints using nails, screws or other fasteners
• Sand wooden surfaces and apply veneer, stain or polish to finished products
• Repair or restyle wooden furniture, fixtures and related products
• May estimate amount, type and cost of materials required.

Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Cabinetmaker.

How to proceed forward with our assistance

1. Complete the following questionnaire and we will further evaluate your qualifications.
2. We will evaluate your qualifications and contact you within 1-2 business days to discuss the modalities of this program.

Canada Bricklayers / Stonemasons

We are currently accepting requests from foreign nationals with suitable experience and training as Bricklayers, seeking to live and work in Canada on an expedited basis, for immediate full time employment in this occupation in Canada.

Our fast track work programs provide qualified applicants and their families with immediate temporary entry to Canada on the basis of a government approved offer of full time employment commensurate with their qualifications.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable 3-year apprenticeship program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences).

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

Read sketches and blueprints to calculate materials required;
Cut and trim bricks and concrete blocks to specification using hand and power tools
Prepare and lay bricks, concrete blocks, stone, structural tiles and similar materials to construct or repair
walls, foundations and other structures in residential, industrial and commercial construction;
Lay bricks or other masonry units to build residential or commercial chimneys and fireplaces;
Lay radial bricks to build masonry shells of industrial chimneys;
Lay or install firebricks to line industrial chimneys and smokestacks;
Line or reline furnaces, kilns, boilers and similar installations using refractory or acid-resistant bricks,
refractory concretes, plastic refractories and other materials;
Lay bricks, stone or similar materials to provide veneer facing to walls or other surfaces;
Construct and install prefabricated masonry units;
Lay bricks or other masonry units to build patios, garden walls and other decorative installations;
May restore, clean or paint existing masonry structures.

Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Bricklayer / Stonemason.

How to proceed forward with our assistance
1. Complete the questionnaire and we will further evaluate your qualifications.
2. We will evaluate your qualifications and contact you within 1-2 business days to discuss the modalities of this program

Canadian Welders

To qualify, prospective applicants must meet the following basic requirements:

1. You must have a minimum of 2+ years of relevant experience.
2. You must have good English or French language skills.
3. You must attest to being drug free.
4. You must have a clean police record during the past 5 years (excluding speeding offences.

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas tungsten arc (GTAW), gas metal arc (GMAW), flux-cored arc (FCAW), plasma arc (PAW), shielded metal arc (SMAW), oxy-acetylene (OAW), resistance welding and submerged arc welding (SAW)
Operate manual or semi-automatic flame cutting equipment
Operate brazing and soldering equipment
Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines
Repair worn parts of metal products by welding on extra layers.
Operate previously set up welding machines such as spot, butt and seam resistance or gas and arc welding machines to fabricate or repair metal parts
Operate previously set up brazing or soldering machines to bond metal parts or to fill holes, indentations and seams of metal articles with solder
Start up, shut down, adjust and monitor robotic welding production line
Assist with the maintenance and repair of welding, brazing and soldering equipment
May adjust welding heads and tooling according to work specifications
Read and interpret blueprints or welding process specifications

Additional qualifications may be required depending on the province of employment:

Completion of secondary school is usually required.
Completion of a three-year apprenticeship program
or
A combination of over three years of work experience in the trade and some college or industry courses in welding is usually required to be eligible for trade certification.
Individuals who meet the above four (4) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Welder.
How to proceed forward with our assistance. Complete the questionnaire and we will further evaluate your qualifications.

Canadian Truck Drivers

We will evaluate your qualifications and contact you within 1-2 business We are currently accepting requests from foreign nationals seeking to live and work in Canada on an expedited basis for immediate full-time employment in the Canadian trucking industry. There is no required investment.

To qualify, prospective applicants must meet the following basic requirements:
1. You must be a minimum of 25 years old, (max 55 years old).
2. You must have good English or French language skills.
3. You must attest to being drug free.
4. You must have a clean police record during the past 5 years (excluding speeding offences.
5. Your driver’s licence must show an accident free record during the past 4 years (HGV & Automobile).

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

Operate and drive straight or articulated trucks, weighing over 4600 kg with three or more axles to transport goods and material to destinations
Oversee all aspects of vehicles, such as condition of equipment, loading and unloading, and safety and security of cargo
Perform pre-trip inspection of vehicle systems and equipment such as tires, lights, brakes and cold storage
Perform emergency roadside repairs
Obtain special permits and other documents required to transport cargo on international routes
Record cargo information, distance travelled, fuel consumption and other information in log book or on on-board computer
Communicate with dispatcher and other drivers using citizens’ band (CB) radio, cellular telephone and on-board computer
May drive as part of a two-person team or convoy
May transport hazardous products or dangerous goods.

Line-haul and local truck drivers perform some or all of the following duties:

Operate and drive straight trucks to transport goods and materials over urban and short inter-urban routes
May drive lighter, special purpose trucks such as tow trucks, dump trucks, hydrovac trucks or cement mixing trucks
Perform pre-trip inspection and oversee all aspects of vehicles such as condition of equipment, and loading and unloading of cargo

Individuals who meet the above five (5) basic requirements and who perform the majority of the above job description may be eligible for our Fast Track Work Program as a Long Haul Truck Driver.

How to proceed forward with our assistance

We look forward to assisting you in relocating to Canada soon!

Canada Machinists

We are currently accepting requests from foreign nationals with suitable experience and training as machinists, seeking to live and work in Canada on an expedited basis for immediate full time employment in this occupation in Canada.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable four year apprenticeship program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences).

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

• Read and interpret engineering drawings, blueprints, charts and tables or study sample parts to determine machining operation to be performed, and plan best sequence of operations
• Compute dimensions and tolerances and measure and lay out work pieces
• Set up, operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision, non-repetitive machining operations such as sawing, turning, milling, boring, planing, drilling, precision grinding and other operations
• Fit and assemble machined metal parts and subassemblies using hand and power tools
• Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments
• May set up and program machine tools for use by machining tool operators.

Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Machinist.

How to proceed forward with our assistance
1. Complete the following questionnaire and we will further evaluate your qualifications.
2. We will evaluate your qualifications and contact you within 1-2 business days to discuss the modalities of this program.

Canada Transport truck and trailer mechanics

We are currently accepting requests from foreign nationals seeking to live and work in Canada on an expedited basis for immediate full-time employment in the Canadian trucking industry.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have good English or French language skills.
3. You must attest to being drug free.
4. You must have a clean police record during the past 5 years (excluding speeding offences.

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

• Adjust, repair or replace parts and components of commercial transport truck systems including chassis, frame, cab, body, engine and drive train, fuel, air brakes, steering, and hydraulic, electrical and electronic systems
• Adjust, repair or replace parts and components of truck trailer systems including structural, brakes and electrical systems.
• Adjust, repair or replace parts and components of automotive systems including fuel, brake, steering and suspension, engine and drive train, emission control and exhaust, cooling and climate control, and electrical and electronic systems using hand tools and other specialized automotive repair equipment
• Test and adjust repaired systems to manufacturer’s performance specifications.
• Perform scheduled maintenance service, such as oil changes, lubrications and tune ups
• Advise customers on work performed, general vehicle conditions and future repair requirements.
Additional qualifications may be required depending on the province of employment:
• Completion of a four-year truck and transport mechanic or truck-trailer repair apprenticeship
or
A combination of over four years of work experience in the trade and high school, college or industry courses in truck or heavy duty equipment mechanics is required to be eligible for trade certification.
Individuals who meet the above four (4) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Transport truck and trailer mechanic.

We look forward to assisting you in relocating to Canada soon!

NURSES

We are currently accepting requests from foreign nationals with suitable experience and training as Nurses (Clinical, Community Health, Critical Care, Intensive Care, Occupational Health, and Registered Nurse R.N.) and Licensed Practical Nurses seeking to live and work in Canada on an expedited basis for immediate full time employment in this occupation in Canada.

Our fast track work programs provide qualified applicants with immediate temporary entry to Canada on the basis of a government approved offer of full time employment commensurate with their qualifications. Applicants will also qualify for Canadian permanent residence.

Canadian employers offer remunerative benefit packages which can exceed C$70,000 – US$65,000 – GBP £38,000.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable university, college or other approved registered nursing program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences.

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:

• Assess patients to identify appropriate nursing interventions
• Collaborate with members of an interdisciplinary health team to plan, implement, co-ordinate and evaluate patient care in consultation with patients and their families
• Administer medications and treatments as prescribed by a physician or according to established policies and protocols
• Monitor, assess, address, document and report symptoms and changes in patients’ conditions
• Operate or monitor medical apparatus or equipment
• Assist in surgery and other medical procedures
• May supervise licensed practical nurses and other nursing staff
• May develop and implement discharge planning process on admission of patients
• May teach and counsel patients and their families on health-related issues in collaboration with other health care providers.
• Registered nurses may specialize in areas such as surgery, obstetrics care, psychiatric care, critical care, pediatrics, geriatrics, community health, occupational health, emergency care, rehabilitation or oncology.
• Nurse practitioners are independent care providers with a broader scope of practice relative to registered nurses.
• Occupational health nurses develop and implement employee health education programs and provide registered nursing care in private businesses and industry.
• Community health nurses provide health education and registered nursing care in public health units and through home visits, manage complex home care cases, participate in community needs assessment and program development, conduct disease screening and deliver immunization programs.
• Psychiatric nurses provide nursing care, supportive counselling and life skills programming to patients in psychiatric hospitals, mental health clinics, long-term care facilities and community-based settings.
• Nursing consultants provide consultative services to institutes, associations and health care organizations regarding issues and concerns relevant to the nursing profession and nursing practice.
• Nursing researchers engaged in research activities related to nursing are self-employed or are employed by hospitals, public and private organizations and governments.
• Clinical nurses provide leadership, advice and counsel on the provision of research-based care for specific patient groups within the care of particular health care organizations.

Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program in the nursing professions in Canada.

How to proceed forward with our program:

1. Click on the following link and complete the applicable questionnaire for an evaluation of your qualifications at no charge.
2. We will evaluate your qualifications and contact you within 1-2 business days to discuss the modalities of this program.
3. We look forward to assisting you in relocating to Canada soon!

Canada Pipe Fitters

We are currently accepting requests from foreign nationals with suitable experience and training as Pipe fitters, seeking to live and work in Canada on an expedited basis for immediate full time employment in this occupation in Canada.

To qualify, prospective applicants must meet the following basic requirements:
1. You must have a minimum of 2+ years of relevant experience.
2. You must have completed a suitable 4-5 year apprenticeship program.
3. You must have good English or French language skills.
4. You must attest to being drug free.
5. You must have a clean police record during the past 5 years (excluding speeding offences.

If you meet the above minimum requirements you must have experience carrying out the majority of the following duties:
• Read and interpret drawings, blueprints and specifications to determine layout requirements
• Cut openings for pipe in walls, floors and ceilings using hand or power tools or machines
• Select type and size of pipe required
• Measure, cut, thread and bend pipe to required shape using hand and power tools
• Weld, braze, cement, solder and thread joints to join pipes and fabricate sections of piping system
• Install supports, valves, piping and control systems
• Test system for leaks using testing equipment
• Clean and maintain pipe units and fittings and flush system
• Remove and replace worn components and reactivate system
• May prepare cost estimates for clients.

Individuals who meet the above five (5) basic requirements and who perform the majority of the above descriptions may be eligible for our Fast Track Work Program as a Pipe fitter.

Quick Contact

Social Networking